Table 001-0017 13039
Estimated areas, yield, production, average farm price and total farm value of principal field crops, in imperial units
annual (data in thousands)


Data table

The data below is a part of CANSIM table  001-0017.  Use the  Add/Remove data  tab to customize your table.

Selected items [Add/Remove data]
by Geography; by Harvest disposition; by Type of crop;
Estimated areas, yield, production, average farm price and total farm value of principal field crops, in imperial units, annual (data in thousands)
Geography Harvest disposition Type of crop 2013 2014 2015 2016 2017
footnotes
Canada Production (bushels) Barley 210 470,188 326,973 377,804 403,428 335,541
Canola 222 817,957 723,563 810,266 864,234 868,964
Corn for grain 216 558,785 452,218 533,800 519,386 563,469
Flaxseed 219 28,765 34,350 37,100 23,150 19,729
Oats 210 253,237 193,161 222,254 207,142 246,550
Soybeans 220 196,907 222,251 237,336 240,748 305,749
Wheat, all 2533 1,378,987 1,080,993 1,013,908 1,165,835 996,854
Wheat, durum 2 239,000 190,800 198,000 285,200 157,973
Wheat, spring 234 1,000,862 782,562 733,487 751,552 737,667
Wheat, winter remaining 2731 139,125 107,631 82,421 129,082 101,214
Production (pounds) Canary seed 2 288,750 275,300 327,700 309,400 256,480
Chick peas 2 373,350 271,200 184,000 165,800 165,400
Lentils 2 4,986,000 4,380,700 5,601,000 7,161,000 5,376,210
Mustard seed 226 340,750 436,550 272,200 519,400 253,490
Sunflower seed 227 114,400 121,300 160,000 111,500 115,350
Maritime provinces Production (bushels) Barley 210 6,118 4,704 5,188 4,890 4,556
Corn for grain 216 4,970 2,850 3,325 4,680 5,539
Oats 210 2,212 2,584 3,248 2,924 2,868
Soybeans 220 3,185 3,255 2,655 2,810 2,985
Wheat, all 2533 1,577 1,884 2,705 2,680 2,684
Wheat, spring 234 1,013 1,306 1,825 1,695 1,864
Wheat, winter remaining 2731 564 578 880 985 820
Prince Edward Island Production (bushels) Barley 210 4,760 3,600 3,800 3,700 3,438
Corn for grain 216 1,070 .. .. 1,200 1,560
Oats 210 750 552 915 710 840
Soybeans 220 2,260 2,210 1,735 1,800 1,682
Wheat, all 2533 925 1,210 1,635 1,785 1,933
Wheat, spring 234 780 970 1,315 1,275 1,532
Wheat, winter remaining 2731 145 240 320 510 401
Nova Scotia Production (bushels) Barley 210 228 179 188 150 250
Corn for grain 216 2,800 1,890 2,200 2,080 2,245
Oats 210 172 172 133 214 204
Soybeans 220 440 545 470 470 567
Wheat, all 2533 385 338 560 475 419
Wheat, spring 234 45 .. .. .. ..
Wheat, winter remaining 2731 340 338 560 475 419
New Brunswick Production (bushels) Barley 210 1,130 925 1,200 1,040 868
Canola 222 270 .. .. .. ..
Corn for grain 216 1,100 960 1,125 1,400 1,734
Oats 210 1,290 1,860 2,200 2,000 1,824
Soybeans 220 485 500 450 540 736
Wheat, all 2533 267 336 510 420 332
Wheat, spring 234 188 336 510 420 332
Wheat, winter remaining 2731 79 .. .. .. ..
Quebec Production (bushels) Barley 210 10,150 7,509 7,716 8,038 8,080
Canola 222 1,477 1,213 1,146 1,499 1,391
Corn for grain 216 148,615 119,168 148,025 149,206 145,330
Flaxseed 219  (T)  (T)  (T)  (T)  (T)
Oats 210 12,255 12,417 16,146 12,968 9,515
Soybeans 220 31,122 32,996 39,981 41,498 40,606
Wheat, all 2533 6,735 7,514 10,343 11,391 11,497
Wheat, spring 234 5,824 6,761 9,002 9,443 9,287
Wheat, winter remaining 2731 911 753 1,341 1,947 2,210
Ontario Production (bushels) Barley 210 6,180 6,950 7,300 6,000 5,240
Canola 222 2,200 1,380 1,500 1,635 1,868
Corn for grain 216 354,600 299,200 348,000 317,000 353,408
Flaxseed 219  (T)  (T)  (T)  (T)  (T)
Oats 210 4,900 4,600 10,000 4,200 4,230
Soybeans 220 119,000 139,300 137,000 124,000 150,858
Wheat, all 2533 87,875 64,300 57,000 93,400 83,283
Wheat, spring 234 4,175 4,500 8,000 4,800 5,175
Wheat, winter remaining 2731 83,700 59,800 49,000 88,600 78,108
East Production (bushels) Barley 210 22,448 19,163 20,204 18,928 17,876
Canola 222 3,947 2,593 2,646 3,134 3,259
Corn for grain 216 508,185 421,218 499,350 470,886 504,277
Oats 210 19,367 19,601 29,394 20,092 16,613
Soybeans 220 153,307 175,551 179,636 168,308 194,449
Wheat, all 2533 96,187 73,698 70,048 107,471 97,464
Wheat, spring 234 11,012 12,567 18,827 15,938 16,326
Wheat, winter remaining 2731 85,175 61,131 51,221 91,532 81,138
Prairie provinces 32 Production (bushels) Barley 210 443,800 305,850 354,500 381,800 315,775
Canola 222 810,100 717,800 804,500 857,500 862,425
Corn for grain 216 50,600 31,000 34,450 48,500 59,192
Flaxseed 219 28,765 34,350 37,100 23,150 19,729
Oats 210 228,300 170,200 189,100 183,400 226,242
Soybeans 220 43,600 46,700 57,700 72,440 111,300
Wheat, all 2533 1,277,220 1,003,275 938,900 1,053,235 897,230
Wheat, durum 2 239,000 190,800 198,000 285,200 157,973
Wheat, spring 234 984,270 765,975 709,700 730,485 719,181
Wheat, winter remaining 2731 53,950 46,500 31,200 37,550 20,076
Production (pounds) Canary seed 2 288,750 275,300 327,700 309,400 256,480
Chick peas 2 373,350 271,200 184,000 165,800 165,400
Lentils 2 4,986,000 4,380,700 5,601,000 7,161,000 5,376,210
Mustard seed 226 340,750 436,550 272,200 519,400 253,490
Sunflower seed 227 114,400 121,300 160,000 111,500 115,350
Manitoba Production (bushels) Barley 210 32,400 16,300 26,000 24,800 18,720
Canola 222 133,400 110,700 126,000 115,000 132,615
Corn for grain 216 48,000 27,400 31,000 46,000 54,432
Flaxseed 219 2,865 3,100 2,800 2,350 1,361
Oats 210 38,300 34,000 38,600 35,700 51,604
Soybeans 220 39,250 40,700 51,100 65,000 91,200
Wheat, all 2533 189,600 139,540 155,000 154,965 141,418
Wheat, durum 2 .. .. .. .. ..
Wheat, spring 234 160,800 122,240 141,500 143,115 137,128
Wheat, winter remaining 2731 28,800 17,300 13,500 11,850 4,290
Production (pounds) Canary seed 2 .. .. .. .. ..
Lentils 2 .. .. .. .. ..
Mustard seed 226 .. .. .. .. ..
Sunflower seed 227 114,400 121,300 160,000 111,500 115,350
Saskatchewan Production (bushels) Barley 210 156,700 99,800 131,500 155,000 122,765
Canola 222 404,700 351,500 420,500 471,000 429,660
Corn for grain 216 .. .. .. .. ..
Flaxseed 219 23,000 27,800 31,000 18,650 15,928
Oats 210 151,000 101,000 125,000 107,200 134,705
Soybeans 220 4,350 6,000 6,600 7,440 20,100
Wheat, all 2533 672,350 520,225 479,300 534,570 400,720
Wheat, durum 2 207,000 164,800 168,000 227,000 118,696
Wheat, spring 234 449,800 336,225 301,900 293,570 272,448
Wheat, winter remaining 2731 15,550 19,200 9,400 14,000 9,576
Production (pounds) Canary seed 2 288,750 275,300 327,700 309,400 256,480
Chick peas 2 373,350 271,200 184,000 165,800 165,400
Lentils 2 4,743,000 4,194,500 5,212,000 6,045,000 4,822,220
Mustard seed 226 258,650 305,550 201,800 357,800 188,130
Sunflower seed 227 .. .. .. .. ..
Alberta Production (bushels) Barley 210 254,700 189,750 197,000 202,000 174,290
Canola 222 272,000 255,600 258,000 271,500 300,150
Corn for grain 216 2,600 3,600 3,450 2,500 4,760
Flaxseed 219 2,900 3,450 3,300 2,150 2,440
Oats 210 39,000 35,200 25,500 40,500 39,933
Wheat, all 2533 415,270 343,510 304,600 363,700 355,092
Wheat, durum 2 32,000 26,000 30,000 58,200 39,277
Wheat, spring 234 373,670 307,510 266,300 293,800 309,605
Wheat, winter remaining 2731 9,600 10,000 8,300 11,700 6,210
Production (pounds) Canary seed 2 .. .. .. .. ..
Chick peas 2 .. .. .. .. ..
Lentils 2 243,000 186,200 389,000 1,116,000 553,990
Mustard seed 226 82,100 131,000 70,400 161,600 65,360
Sunflower seed 227 .. .. .. .. ..
British Columbia Production (bushels) Barley 210 3,940 1,960 3,100 2,700 1,890
Canola 222 3,910 3,170 3,120 3,600 3,280
Flaxseed 219  (T)  (T)  (T)  (T)  (T)
Oats 210 5,570 3,360 3,760 3,650 3,695
Wheat, all 2533 5,580 4,020 4,960 5,129 2,160
Wheat, spring 234 5,580 4,020 4,960 5,129 2,160
Wheat, winter remaining 2731 .. .. .. .. ..
West Production (bushels) Barley 210 447,740 307,810 357,600 384,500 317,665
Canola 222 814,010 720,970 807,620 861,100 865,705
Corn for grain 216 50,600 31,000 34,450 48,500 59,192
Flaxseed 219 28,765 34,350 37,100 23,150 19,729
Oats 210 233,870 173,560 192,860 187,050 229,937
Soybeans 220 43,600 46,700 57,700 72,440 111,300
Wheat, all 2533 1,282,800 1,007,295 943,860 1,058,364 899,390
Wheat, durum 2 239,000 190,800 198,000 285,200 157,973
Wheat, spring 234 989,850 769,995 714,660 735,614 721,341
Wheat, winter remaining 2731 53,950 46,500 31,200 37,550 20,076
Production (pounds) Canary seed 2 288,750 275,300 327,700 309,400 256,480
Chick peas 2 373,350 271,200 184,000 165,800 165,400
Lentils 2 4,986,000 4,380,700 5,601,000 7,161,000 5,376,210
Mustard seed 226 340,750 436,550 272,200 519,400 253,490
Sunflower seed 227 114,400 121,300 160,000 111,500 115,350


Note: As of October 4, 2017, data for reference year 2017 in this CANSIM table 001-0017 has been updated and now reflects field crops data as published on September 19 in CANSIM table 001-0075 (Model-based Principal Field Crop Estimates). Also, in the fall of 2017, data from CANSIM table 001-0010 (field crops data expressed in metric units of measure) will be transfered over to CANSIM table 001-0017. Therefore all of the crops data on areas, yields and production, whether expressed in imperial or metric units of measure, will be available from then on under CANSIM table 001-0017 only. Table 001-0010 will then be deleted as a result of this merge process.

Symbol legend:

..
Not available
(T) 
Series is terminated

Footnotes:

Farm surveys collect data from Quebec, Ontario, Manitoba, Saskatchewan and Alberta at all five survey occasions during the crop year (which extends from the December to the following November occasion). However, data are collected twice a year (in the June Farm survey on seeded areas and in the November Farm survey on final crop production) for Newfoundland and Labrador, Prince Edward Island, Nova Scotia, New Brunswick and British Columbia, which represent between 2% and 4% of national totals. As of July 2014 for the Atlantic provinces and British Columbia, July and September production estimates are calculated using the final estimates of the last three crop years. The harvested area is first estimated based on the ratio obtained from the sum of harvested areas of the last three years over the sum of the seeded areas of the last three years. This average ratio is applied to their current year's reported seeded acreage from the June survey. This estimated harvested area is then multiplied by the average yield of the last three years to estimate production.
For metric data see CANSIM table 001-0010.
Seeded area, yield and production of all wheat in Alberta include relatively small estimates of winter wheat for years 1921 to 1977.
Data begin in 1908 for Ontario, in 1976 for Canada, Prairies and Alberta, in 1981 for Saskatchewan, in 1986 for Prince Edward Island, Nova Scotia, New Brunswick, Quebec and Manitoba. Average farm price and total farm value begin in 1978.
Data for British Columbia begin in 1910.
Data for Nova Scotia were discontinued in 1931, re-activated in 1981 and discontinued again in 1986. Data for New Brunswick were also discontinued in 1931. Data for Quebec were discontinued in 1981 and re-activated in 1991. Data for British Columbia begin in 1910.
Data for Quebec were discontinued in 1981 and re-activated in 1991. Data for Nova Scotia begin in 1981 and ends in 1986. Data for the Prairies begin in 1976. Prior to 1977, data for Quebec, Ontario and British Columbia are the same as all rye.
Data for Manitoba were discontinued in 1987.
Data for the three Prairie provinces and British Columbia begin in 1910. Nova Scotia, New Brunswick and British Columbia data were discontinued in 1987, but data for New Brunswick were re-activated in 1991.
Data were discontinued between 1932 and 1966 for Quebec. Data begin in 1941 for Manitoba, in 1979 for Alberta and in 1983 for Nova Scotia.
Data were discontinued in 1941 for Prince Edward Island and Nova Scotia. Ontario data were discontinued in 1980 and re-activated in 1986. Data for Manitoba begin in 1925.
Data were discontinued in 1931 for Prince Edward Island, Nova Scotia and New Brunswick, in 1974 for Ontario and in 1975 for Quebec. Saskatchewan and Alberta data begin in 1910. Data for British Columbia also begin in 1910 but were discontinued in 1977 and re-activated in 1995.
Data for Quebec begin in 1910 and were discontinued in 1972. Data for Ontario also begin in 1910, but were discontinued in 1973, and data for British Columbia begin in 1924 and were discontinued in 1972.
Most of the soybean crop is grown in Ontario but it was also grown in small areas in other provinces in the years 1942 to 1945. The total for Canada includes this production, but provincial data are not shown. Data begin in 1991 for Prince Edward Island and in 1986 for Quebec. Data for Manitoba begin in 1956 and were discontinued in 1960.
Estimates are not available for small area, which were grown in Alberta and Ontario between 1943 and 1945. Data begin in 1996 for Quebec, in 1983 for Ontario, in 1955 for Alberta and in 1967 for British Columbia.
Data for Quebec begin in 1944 and were discontinued in 1986. Data for Ontario were discontinued in 1968 due to shutdown of processing facilities at Chatham. Data for Manitoba begin in 1940 and were discontinued in 1997.
Data for British Columbia begin in 1910.
Data for Prince Edward Island, Nova Scotia and New Brunswick were discontinued in 1941 and re-activated in 1975. Data for Prince Edward Island and New Brunswick were discontinued again in 1987 and data for New Brunswick were re-reactivated in 1991. Data were discontinued in 1972 for Saskatchewan and in 1953 for Alberta. Data for the Prairie provinces and British Columbia begin in 1910. Data for Canada do not include production data for the Maritime provinces in 1975.
Data begin in 1952 for Manitoba and in 1960 for Saskatchewan.
Data for Saskatchewan begin in 1943 and were discontinued in 1946, and began again in 1963. Data for Alberta begin in 1958 and were discontinued in 1974, and began again in 1986.
Data were discontinued in 1931 for Nova Scotia, in 1939 for Saskatchewan and in 1941 for New Brunswick and British Columbia. Data for Alberta were discontinued in 1941 and re-activated in 1991. Data for Quebec were discontinued in 1976 and re-activated in 1991. Data begin in 1991 for Manitoba, in 1918 for Saskatchewan and Alberta and in 1910 for British Columbia.
Prior to 1976 the data were reported in bushels. Beginning in 1976 the data are reported in hundredweight.
Totals may not equal the sum of their parts due to the use of conversion factors or rounding of fractions to whole numbers.
Winter wheat remaining and fall rye remaining indicate the areas seeded in the fall of the previous year that are remaining after winterkill.
Prairies includes Manitoba, Alberta and Saskatchewan, but excludes British Columbia.
All wheat includes spring wheat, durum wheat and winter wheat seeded in the fall.
The spring wheat breakdown is only available for the Western provinces. The spring wheat total at the Canada level includes spring wheat from the Eastern provinces and the spring wheat breakdown from the Western provinces.
All rye includes spring rye and fall rye seeded in the fall.
Respondents are asked to report the percentage moisture of their harvested fodder corn. Estimates of production for fodder corn are calculated using a standard percentage moisture content of 70%.
Respondents are asked to report the percentage moisture of their harvested hay for silage. Estimates of production for total hay is reported at a standard dry matter content of 90%.
The category Tame hay above represents the sum of estimates originally reported under the 2 following questionnaire categories: Alfalfa and alfalfa mixtures and Other tame hay.
On December 13, 2016, estimates for category "Wheat, all excluding durum wheat" in 2016 were corrected for the following geographies: Maritime provinces, East and Canada.

Source:  Statistics Canada. Table  001-0017 -  Estimated areas, yield, production, average farm price and total farm value of principal field crops, in imperial units, annual,  CANSIM (database). (accessed: )
Back to search

Add/Remove data

Select the specific items from each step to create your customized CANSIM table.

Step 1- Select: Geography  

(15 of 15 items selected)
D1-picklist-container

Step 2- Select: Harvest disposition  

(4 of 15 items selected)
D2-picklist-container

Step 3- Select: Type of crop  

(15 of 44 items selected)
D3-picklist-container

Step 4 - Select the time frame

By default, only data for the most recent periods available will be retrieved. You may use the lists below to select a different time frame.
From :  To : (Annual data)

Step 5 - Select the Screen output format






Step 6

 

Download

Select an option to download data in the desired format.

Option 1 - Download data as displayed in the Data table tab
 

 

 




Option 2 - Download entire table
(Files modified on 2017-10-04)



Data table will contain:
Note: 
Statistics Canada assumes responsibility for the quality of data as retrieved with the frequency unchanged. Clients take responsibility for any manipulations made to the original data.
Frequency of data is already of annual frequency or greater, therefore no frequency conversion options are presented.
View additional information related to this table.

Related data tables

Related publications
View latest article from The Daily related to this table.
View list of related publications.

Additional information on the survey or statistical program


Help

Data table

When first opening a CANSIM table, the data that is shown is considered the initial view. Depending on the size of the CANSIM table, this table might only represent a summary with five reference periods, if available. You can use the Add/Remove data tab to add or remove data.

To download the entire table, select option 2 in the Download tab.

Add/Remove data

The Add/Remove data tab is a pick list where you choose which subset of the selected table you want to work with. There is one scrollable pick list for each dimension in the table and you must select at least one item from each list before selecting Apply.

An All checkbox appears under each dimension title and just above the scrollable list. Level checkboxes will appear for dimensions containing hierarchies. An Expand/Collapse option is available near the scrollable list which lets you open a dimension to see the list of its members/items.

Before proceeding with the request, check the data ranges for which data is available and reduce this range if you wish; data retrievals are faster when the time period is short. Also, you can select one of four options of a screen output format, default being HTML table, times as column.

Once done with your selections, select Apply to view your customized selection, or select Back to original table to return the selections back to the CANSIM initial view that was shown when first opening the table.

Note: There is no guarantee that data exist for every intersection of every dimension; so it is possible that even if you have selected at least one member/item from all the lists you might still be warned that your retrieval contains no series.

Note: If the designation (Terminated) appears at the end of a member/item name that member/item is terminated. Time series attached to a terminated member/item may be revised, but are no longer updated and may not contain data for the most recent time periods.

Tips for selecting members/items:

  • You can select all members/items in a hierarchical level by selecting the corresponding level.

Note: If you receive an error message after selecting your members from the pick list it's either because your request does not contain series or one member/item has not been selected from a dimension.

Manipulate

Statistics Canada assumes responsibility for the quality of data as retrieved with the frequency unchanged. Clients take responsibility for any manipulations made to the original data.

Frequency of output data will be:

The frequency conversion options are particularly useful to convert data from one frequency to another for comparability purposes.

Note: When frequency of data is already of annual frequency or greater, then no frequency conversion options are presented. Certain series can only be aggregated by specific methods. If the frequency conversion chosen is not allowed, resultant data will appear as "..".

Converted to:

The frequency designates how often data observations are published. A table can contain only one frequency. By default, the frequency of output data will be left unchanged.

Frequency can be converted by these choices:

  • Annual average: Conversion by averaging is more appropriate for "balance"-type data such as "Population as of July 1" as well as rates and indexes.
  • Annual sum: Conversion to a sum should not be performed on a rate or index. Conversion by summing is more appropriate for "count"-type data, such as "Number of cars sold" or "Number of births".
  • Quarterly average: Conversion by averaging is more appropriate for "balance"-type data such as "Population as of July 1" as well as rates and indexes.)
  • Quarterly sum: Conversion by summing is more appropriate for "count"-type data, such as "Number of cars sold" or "Number of births".
  • Annual - convert to annual by selecting a specific month or quarter: This type of calculation is most useful when data for a specific sub-annual period (month or quarter) is used to state an annual figure such as "Population as of July 1".

When converting frequency by summing or averaging:

Two choices are offered when converting frequency using either a sum or an average:

  • Use calendar year: This is a normal calendar year starting in January and ending in December.
  • Use fiscal year ending with last month retrieved: The annual non-calendar fiscal year average manipulation permits users to calculate the average value for the last twelve months ending with the most recent reference period selected. In order to complete this calculation, please follow these steps:
    • In the section entitled "Frequency of output data will be:" sub-section "Standard frequency conversion options" select "Annual (average)".
    • In the section "When converting frequency by summing or averaging:" select "Use fiscal year ending with last month retrieved".
    • If you wish the output of your data as a percentage change from the previous year please select "Percent changes, year-to-year" found below "Data table will contain:"

Data table will contain:

Select one of these data transformations options to convert your data:

  • Percent changes, period-over-period: If the frequency of the data is monthly, the calculation would measure the change of the data value in percent between consecutive time periods, (for example: between July 1998 and August 1998.)
  • Percent changes, year-over-year: If the frequency of the data is monthly, the calculation would measure the change of the data value in percent between consecutive years, (for example: between July 1998 and July 1999).
  • Year-to-date sums: Data for each sub-annual period is added consecutively to the previous period showing cumulative sums for each period.
  • Year-to-date average: Data for each sub-annual period is averaged consecutively to the previous period showing cumulative averages for each period.

Note: CANSIM rounds data using statistician's rounding (also known as round-to-even method, unbiased rounding, convergent rounding and banker's rounding) which may differ from rounding methods used by common spreadsheet software.

Statistician's rounding rounds the following way:

  • If the second decimal is larger than 5, the first decimal is incremented by 1 (see example 1).
  • If the second decimal is smaller than 5, the first decimal stays unchanged (see example 2).
  • When the second decimal is exactly 5, the "odd/even" rules apply. The first decimal is incremented by 1 if it is odd (see example 4), and left unchanged if it is even (see example 3).
  • Example:
    1. 4.46 rounded to one decimal equals 4.5
    2. 4.44 rounded to one decimal equals 4.4
    3. 4.45 rounded to one decimal equals 4.4
    4. 4.15 rounded to one decimal equals 4.2

Once you made your selections select the Apply button.

Download

Option 1 - Download data as displayed in the Data table tab

This option downloads your selection and is displayed in the Data table tab or you can modify using the download options.

Three download options are available:

  • Select the language: You have the choice of the English or French language for the textual content.
  • Select the data output format type: You have the choice of the following six format types:
    • time as columns, where the time frame you have selected will be displayed in columns
    • time as rows, where the time frame you have selected will be displayed in rows.
    • for database loading, where you will download a flat format file ready for database loading
    • for database loading with data quality indicators, where you will download a flat format file including data quality indicators
    • time as columns with data quality indicators, where the time frame you have selected will be displayed in columns including data quality indicators
    • time as rows with data quality indicators, where the time frame you have selected will be displayed in rows including data quality indicators
  • Select the file format: you will have the choice of the following two output separator types:
    • CSV (comma-separated values) English spreadsheet is usually used when retrieving English tables with computers having their Regional set to English.

If your objective is to load the data into a spreadsheet package the best choice for output format is a comma-separated values (CSV) file.

Note: CSV and Semicolon-Separated Values (SCSV) files are produced differently whether you perform the retrieval in English or French. This is because, in French, the comma is used to indicate decimals; a different separator (a semicolon) must therefore be used. SCSV files retrieved in French will parse correctly only if the Regional Settings are set to French.

Once you made your selections select the Download data button.

Option 2 - Download entire table

You will have the option to Download entire table as a CSV file or a Beyond 20/20 or SDMX file which will open a new window.

This table represents all of the items in the CANSIM table. To get an initial view (summary) of the CANSIM table, select the Data table tab.

Note: Downloading tables in Beyond 20/20 output format requires the Beyond 20/20 Table Browser.

Once you made your selections select the Download entire table button.

Related information

This page contains links to items related to your CANSIM table. Select the various links to view these related items.

Related data tables

View a list of related CANSIM tables that are related to this CANSIM table.

Related publications

View the latest article from The Daily and a list of related publications from Statistics Canada.

The Daily is Statistics Canada's official release bulletin, the Agency's first line of communication with the media and the public. The Daily issues news releases on current social and economic conditions and announces new products. It provides a comprehensive one-stop overview of new information available from Statistics Canada.

Additional information on the survey or statistical program

Definitions, data sources and methods: Here is where you will find a link to the Integrated Meta Data Base (IMDB) where you may view details for the survey number(s) assigned to the CANSIM table.

The Integrated Meta Data Base (IMDB) contains information about the surveys and statistical programs carried out by Statistics Canada and other agencies to collect assemble process and disseminate statistical information.

The IMDB may be used to find out how data for particular CANSIM tables are collected or to identify contacts for questions on the data or survey methodology. The IMDB contains descriptions of over 450 surveys and statistical programs each identified by a unique four-digit survey number.

After selecting a survey or a program from the list, you may choose to either retrieve the list of CANSIM tables for that survey or program, or consult the IMDB for more information.